Panasonic HDC-SD10PP Camcorder User Manual


 
46
VQT2H52
Recording
Recording (Basic)
3
Recording still pictures
The number of pixels recorded for still pictures is [ 1920k1080] (16:9). Still pictures can also be
recorded while recording motion pictures.
Open the lens cover before turning on the power. (l 17)
1 Change the mode to .
2 Open the LCD monitor.
For users who have , proceed to
step 4.
3 /
Select the media to record from
the menu. (l 42)
Select whether to record still pictures to the
SD card or the built-in memory.
You cannot set the recording media for motion
pictures and still pictures separately.
4 Press the button halfway.
(For auto focus only)
Focus indication appears and the
unit focuses on the subject
automatically.
If you set the Optical Image Stabilizer function
(l 50) to Active mode/ON, then the image
stabilizer function will be more effective.
( (MEGA optical image stabilizer) will be
displayed.)
Focus indication:
A Focus indication
± (The white lamp flashes.):
Focusing
¥ (The green lamp lights up.):
When in focus
No mark:
When focusing is unsuccessful.
B Focus area (area inside brackets)
5 Press the button fully.
In order to take better still
pictures, the screen will brighten
when the button is fully
pressed.
The sound cannot be recorded while recording
still pictures.
The edges of still pictures recorded on this unit
with a 16:9 aspect ratio may be cut at printing.
Check the printer or photo studio before
printing.
2.1
M
MEGA
HDCSD10_TM10_TM15P-VQT2H52_eng.book 46 ページ 2009年7月6日 月曜日 午後1時46分