Filter
Top Products
112
VQT1N45
If faulty management information is found when a SD card is accessed, one of the following messages
may appear. Be sure to follow the messages. (Repairing may take time depending on the error.)
≥ Use a sufficiently charged battery or the AC adaptor.
≥ Depending on the condition of the data, it may not be possible to completely repair the data.
≥ If the recovery fails, you will no longer be able to play back the scenes recorded before the power
went off.
≥ When data recorded on another device is recovered, it may not be possible to play back the data on
this unit or the other device.
≥ If recovery fails, turn the power of the unit off and on again after waiting a while. If recovery fails
repeatedly, format an SD card on the unit. Please be aware that if an SD card is formatted, then all
the data recorded on the card will be erased. Back up important data on a PC, DVD disc etc.
≥ If the thumbnail information is recovered, displaying the thumbnails may become slower.
DISCONNECT USB CABLE.
The unit cannot correctly establish the connection to the PC or printer. Disconnect and then
reconnect the USB cable.
DISCONNECT USB CABLE.
You cannot turn off this unit while it is connected to a PC or a DVD burner.
About recovery
CONTROL DATA ERROR HAS BEEN DETECTED. (SD CARD)
or
THUMBNAIL DATA ERROR IS DETECTED.
HDCSD9P-VQT1N45_ENG.book 112 ページ ２００７年１２月２６日 水曜日 午後５時５７分