Filter
Top Products
77
VQT1Y00
If auto focusing is difficult due to the conditions,
then use manual focus.
≥ Press the MANUAL button. (l 74)
1 (When MF assist function is used)
Select the menu. (l 34)
≥ This function’s default setting is [ON].
2 Touch [MF] icon.
≥ In Manual Focus mode, [AF] icon appears on
the screen.
3 Adjust the focus by touching / .
The center of the screen is enlarged. The normal
screen returns approximately 2 seconds after
you finish bringing the subject into focus.
≥ The center of the screen is not enlarged when
[MF ASSIST] is [OFF].
≥ To return to Auto Focus, touch [AF] icon or
press the MANUAL button again.
≥ MF assist does not work if the zoom
magnification is more than 16k.
≥ The part of the screen that is enlarged is not
enlarged on the image actually recorded.
Adjust the quality of the image while recording.
Adjust by outputting to a TV while adjusting the
quality of the image.
≥ Press the MANUAL button. (l 74)
1 Select the menu. (l 34)
2 Touch the desired setting items.
[SHARPNESS]:
Sharpness of the edge
[COLOR]:
Depth of the color of the image
[EXPOSURE]:
Brightness of the image
3 Touch / to adjust settings.
≥ After adjustments are made, if no operations
are performed for about 2 seconds, the bar will
disappear.
4 Touch [ENTER].
≥ Touch [EXIT] or press the MENU button to
complete the settings. appears on the
screen.
Manual focus adjustment
[RECORD SETUP] # [MF ASSIST] # [ON]
F
IRISSHTRWB
MF
MF
MF
F
IRISSHTRWB
MF
MFMF
MF
MF
AF
Picture adjustment
[RECORD SETUP] # [PICTURE ADJUST]
# [YES]
HDCSD20&SD25&HS20P-VQT1Y00_eng.book 77 ページ ２００８年１２月２２日 月曜日 午後８時１６分