Panasonic HDC-TM60 Camcorder User Manual


 
27
(ENG) VQT2M64
Basic
Recording/
Playback
4
Intelligent auto mode
The following modes appropriate for the condition are set just by pointing the unit to what you
want to record.
*1 In motion picture recording mode only
*2 In still picture recording mode only
Depending on the recording conditions, the unit may not enter the desired mode.
In the portrait mode, one that is bigger and close to centre of the screen will be surrounded
by an orange frame.
It is recommended using a tripod in night portrait and night scenery mode.
Optical image stabilizer function (l 33) is set to Active mode/ON in all modes.
Faces cannot be detected depending on the recording conditions, such as when faces are
of certain sizes or at certain tilts or when digital zoom is used.
The zoom microphone is set to [OFF] in the Intelligent auto mode.
Mode Scene Effect
Portrait When the object is
a person
Faces are detected and focused
automatically, and the brightness is
adjusted so it is recorded clearly.
Scenery
Recording outdoors
The whole landscape will be recorded
vividly without whiting out the background
sky, which may be very bright.
Spotlight
*1
Under a spotlight Very bright object is recorded clearly.
Low light
*1
Dark room or twilight
It can record very clearly even in a dark
room or twilight.
Night portrait
*2
Recording night
portrait
A person and the background are
recorded with near real-life brightness.
Night scenery
*2
Recording night
scenery
You can record night scenery vividly by
slowing the shutter speed.
Macro
*2
Recording zooming
in on a flower etc.
This allows recording while going near
to the object of recording.
/ Normal Other situations Contrast is adjusted automatically for
clear image.
/MANUAL
Intelligent auto/Manual button
Press this button to switch Intelligent
auto mode/Manual mode.
HDCSD60&TM60&HS60EP-VQT2M64_mst.book 27 ページ 2010年1月15日 金曜日 午前9時42分