76
VQT3K69
Change the lower setting of the built-in microphone according to your choice.
≥ Switch to Manual Mode. (l 82)
≥ Normally set to [0dB].
≥ Select [+3dB] or [+6dB] to get strong power feeling at bass level.
Adjust the quality of the image while recording.
Adjust by outputting to a TV while adjusting the quality of the image.
≥ This setting is retained when you change between Motion Picture Recording Mode
and Still Picture Recording Mode.
≥ Switch to Manual Mode. (l 82)
1 Select the menu.
2 Touch the desired setting items.
3 Touch / to adjust settings.
4 Touch [ENTER].
≥ Touch [EXIT] to complete the settings.
≥ appears on the screen.
Parts where white saturation (color saturation) is likely to
occur (extremely brightly lit or shiny parts) are displayed with
diagonal lines (zebra pattern).
≥ Switch to Manual Mode. (l 82)
≥ You can record an image with little white saturation if you
manually adjust the shutter speed or brightness (Iris/Gain) (l 84).
≥ The zebra pattern does not appear on the images actually recorded.
[BASS SETTING]
: [RECORD SETUP] # [BASS SETTING] # desired setting
[0dB]/[+3dB]/[+6dB]/[LOWCUT]
[PICTURE ADJUST]
: [RECORD SETUP] # [PICTURE ADJUST]
[SHARPNESS]: Sharpness of the edge
[COLOR]: Depth of the color of the image
[EXPOSURE]: Brightness of the image
[WB ADJUST]: Picture color balance
[ZEBRA]
: [RECORD SETUP] # [ZEBRA] # [ON]
≥ It is possible to set from the quick menu in Manual Mode.
(l 45)
MENU
MENU
A Zebra pattern
MENU
HDCTM900&HS900P&PC-VQT3K69_mst.book 76 ページ 2010年12月16日 木曜日 午後7時8分