Filter
Top Products
7
(ENG) VQT5E43
≥ When flash recording with a close subject, the
light of the flash will be blocked by the lens and
part of the picture may be dark. Check the
distance from the subject when recording.
≥
Operating sounds may be recorded when auto-
focusing during motion picture recording. If
operating sounds become bothersome, we
recommend setting to manual focus (MF) and fixing
focus before recording to avoid recording the lens
noise.
≥
If you set the [O.I.S.] to [ON] when recording a motion
picture, operating sounds may be recorded. If they
become bothersome, we recommend setting the [O.I.S.]
switch to [OFF] and mounting the camera on a tripod.
≥ The aperture can be adjusted with the aperture
ring only when a Panasonic digital camera is
attached to the lens. (As of January 2014)
Attaching/Detaching the Lens
Check that the camera is
turned off.
≥ Remove the lens rear cap
from the lens.
∫Attaching the Lens
Align the lens fitting marks
A
on the camera body and
the lens and then rotate the
lens in the direction of the
arrow until it clicks.
•Do not press the lens
release button B when
you attach a lens.
• Do not try to attach the lens when holding it at an angle to
the camera body as the lens mount may get scratched.
•Check that the lens is attached correctly.
•Be sure to remove the lens cap when recording.
∫Detaching the Lens
While pressing on the
lens release button B,
rotate the lens toward
the arrow until it stops
and then remove.
•Attach the lens rear cap so
that the lens contact point
does not get scratched.
•Attach the body cap to the camera so no dirt or
dust will get inside the main unit.
VQT5E43_ENG_SPA.book 7 ページ ２０１３年１２月２５日 水曜日 午後７時４１分