Panasonic H-VS014140 Camera Lens User Manual


 
10
VQT2C38
–Near heaters, air conditioners or humidifiers
–Where water may make the unit wet
–Where there is vibration
–Inside a vehicle
Refer also to the operating instructions of the
digital camera.
When the unit is not going to be used for a
prolonged period, we recommend storing with a
desiccant (silica gel). Failure to do so may result in
performance failure caused by mold, etc. It is
recommended that you check the unit’s operation
prior to use.
Do not leave the lens in contact with rubber or
plastic products for extended periods of time.
Do not touch the lens contact point. Doing so can
cause failure of the unit.
Do not disassemble or alter the unit. If the internal
parts require inspection or repair, take the unit to
the vendor.
Do not use benzine, thinner, alcohol or other
similar cleaning agents to clean the lens glass or
exterior cabinet.
Using solvents can damage the lens or cause the
paint to peel.
Wipe off any dust or fingerprints with a soft, dry
cloth.
Use a dry, dust cloth to remove dirt and dust on
the zoom ring and the focus ring.
Do not use a household detergent or a chemically
treated cloth.
A sound is heard when the camera is turned on
or off.
This is the sound of lens or aperture movement
and is not a malfunction.
Troubleshooting
H-VS014140PP-VQT2C38.book 10 ページ 2009年3月12日 木曜日 午前10時43分