Filter
Top Products
Before using
7
VQT0T87
(22) LCD monitor open part [OPEN] -8-
(23)
Reset button [RESET] -48-
(24)
Power LCD button [POWER LCD] -17-
Power LCD lamp -17-
(25)
Mode select switch
[AUTO/MANUAL/FOCUS]
-20-, -30-, -32-
(26)
Card access lamp -12-
(27)
DV terminal [DV] -40-
(28)
Card slot cover -12-
(29)
Card slot -12-
(30)
Cassette holder -11-
(31)
Cassette eject lever [OPEN/EJECT] -11-
(32)
Cassette cover -11-
(33)
Zoom lever [W/T] -24-
Volume lever [s /VOLr] -34-
(34)
Photoshot button [PHOTO SHOT] -21-
(35)
Accessory shoe
≥Accessories, such as a stereo microphone
(VW-VMS2E; optional), are attached here.
(36) Tripod receptacle
This is a hole for attaching the camera to optional
tripod/VW-CT45E. (Please carefully read the
operating instructions for how to attach the tripod
to the camera.)
≥You cannot open the card slot cover when the
tripod is used. Insert the card first and then
attach the tripod.
(37) Shoulder strap fixture
≥Put the strap through the fixture 1 and through
the stopper 2 so it will not come off. Extend
part 3 by at least 2 cm.
≥Fit the other end of the belt similarly.
(38) Lens hood
In order to remove the lens hood, rotate it
counterclockwise 1. In order to fit it, put into slot
2, and then rotate it clockwise.
≥Fit the MC protector or the ND filter of the Filter
Kit (VW-LF37WE; optional) in front of the lens
hood. Do not fit the other accessories on the
hood. (Except for the lens cap)
≥When fitting the tele conversion lens
(VW-LT3714ME; optional) or the wide
conversion lens (VW-LW3707M3E; optional),
first remove the lens hood.
≥When 2 lens accessories, such as the ND filter
and tele conversion lens, are fitted and the
[W/T] lever is pressed toward the [W] side, the
4 corners of an image will be darkened.
(Vignetting)
(30)
(31)
(32)
(33)
(34)
(35)
(36)
(37)
3
2
1
1
2
(38)
Eng_Body.fm 7 ページ ２００５年１０月２８日 金曜日 午後８時９分