Filter
Top Products
Edit mode
37
VQT0N61
Edit mode
Recording from a tape onto a card
Still pictures can be recorded on a memory card
from scenes that have already been recorded on
a cassette.
≥Set to Tape Playback Mode.
≥Insert a tape which already has recorded
contents and a card.
1 Start playback.
2 Pause at the scene you wish to record, and
press the [PHOTO SHOT] button.
≥Audio will not be recorded.
≥The size of still pictures recorded on a card
becomes [640]. (This is not mega pixel still-
picture recording.)
≥If you press the [PHOTO SHOT] button without
pausing, blurred pictures may be recorded.
≥DV input and wide images recorded on a tape
cannot be recorded on a card.
Copying onto a DVD recorder or a
VCR (Dubbing)
Pictures recorded by the movie camera can be
stored on a DVD-RAM or other such media. Refer
to the instructions for the recorder.
≥Place a recorded cassette in the movie
camera, and an unrecorded DVD-RAM or
cassette in the DVD recorder or VCR.
1 Connect the movie camera and the
recorder.
Connecting with the AV cable
≥Connect the movie camera and the recorder
by using the AV cable 1.
≥If the recorder has an S-Video terminal, then
also connect an S-Video cable 2 (optional). It
allows you to copy clearer image.
Connecting with the optional DV cable (Only
for equipment with a DV terminal)
2 Turn on the movie camera and set to Tape
Playback Mode.
3 Select the input channel on the TV set and
recorder.
4 Move the joystick up to select the [1] icon
to start playback.
≥The image and sound are reproduced.
5 Start recording.
6 Move the joystick down to select the [∫]
icon to stop playback.
7 Stop recording.
PHOTO
SHOT
12
[VIDEO IN]
[AUDIO IN]
[S-VIDEO IN]
AV/
S-VIDEO
2
(L2)
(L2)
S
/
DV
GS75GN.book 37 ページ ２００５年１月２６日 水曜日 午後５時８分