Filter
Top Products
Before using
9
LSQT1291
Using the lens cover
For the lens protection, be sure to close the lens
cover when not in use.
1 Slide the lens cover open/close switch to
[].
Power supply
ª Charging the battery
When this product is purchased, the battery is not
charged. Charge the battery before using this product.
≥Battery charging time (-11-)
≥We recommend using Panasonic batteries. (
-6-)
≥If you use other batteries, we cannot guarantee
the quality of this product.
≥If the DC input lead is connected to the AC
adaptor, then the battery will not get charged.
Remove the DC input lead from the AC adaptor.
1 Connect the AC mains lead to the AC
adaptor and the AC mains socket.
2
Put the battery on the battery mount by
aligning the mark, and then securely plug it in.
ª Charging lamp
Lights up: Charging
Goes off: Charging completed
Flashing: When the battery temperature is
excessively high or low, the lamp
flashes and the charging time will be
longer than normal. Remove dirt,
foreign objects or dust on the
terminals of the battery or the AC
adaptor. If the lamp is still flashing,
something may be wrong with the
battery or AC adaptor.
Contact your dealer.
It has been found that counterfeit battery packs
which look very similar to the genuine product
are made available to purchase in some
markets. Some of these battery packs are not
adequately protected with internal protection to
meet the requirements of appropriate safety
standards. There is a possibility that these
battery packs may lead to fire or explosion.
Please be advised that we are not liable for any
accident or failure occurring as a result of use of
a counterfeit battery pack. To ensure that safe
products are used we would recommend that a
genuine Panasonic battery pack is used.
≥Be aware that many batteries sold at
extremely cheap prices or in situations where
it is difficult to verify the actual products
before purchase have proven to be
counterfeit.
1
2
LSQT1291_ENG.book 9 ページ ２００８年３月５日 水曜日 午前９時４１分