Filter
Top Products
20
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Playing Back Recordings
Before you begin...
• Connect Camcorder to power source.
• Insert recorded tape.
Tracking Control
Quick Visual Search
Search Speed
• SP (Standard Play) : 3 times normal.
• SLP (Super Long Play) : 9 times normal.
During playback, press:
• FF : fast forward search
• REW : rewind search
Press again or press PLAY for normal play.
Still Picture
Press STILL to freeze picture.
Press again for normal play.
This feature works best in SLP mode (page 11).
Special Effects
Note:
•During search, horizontal noise bars will appear.
Audio is muted.
•To protect video heads and tape, operating
modes will revert as follows after 5 minutes:
Still Stand-by
Stand-by Power off (when Battery Pack is
used).
• Tape auto-rewinds if played or fast forwarded to end.
Note:
• Using LCD monitor reduces battery operating
time. Return LCD monitor to locked position
when not in use.
1
Press LCD-OPEN and swing LCD
monitor fully open.
• If you want to playback on EVF, close
and lock LCD monitor.
2
Set POWER to VCR.
• If tape has no record tab, auto
playback begins.
• EVF or LCD monitor turns on/off by
the POWER switch.
• EVF shuts off when LCD monitor is
opened and turns back on when LCD
is closed (Color EVF model only).
3
Playback function buttons.
A
REW : Rewind tape.
B
PLAY : Play tape.
C
STOP : Stop tape.
D
BRIGHT :
Adjust LCD monitor brightness.
E VOLUME: During playback, adjust
volume of speaker.
Press “T” : Volume
up (+).
Press “W” : Volume
down (-).
Playback on EVF or LCD Monitor
Auto Tracking
Continuously analyzes each recording for
optimum picture quality.
Manual Tracking
Some recordings require manual
adjustment to reduce noise.
Press
UP or DOWN until Playback picture
clears up.
Press
DISPLAY to return to Auto Tracking.
Speaker
1
3
BRIGHT
ADJUSTMENT
D
2
3
B
A
C
E
STILL