Filter
Top Products
- 4 -
INSTALLATION of the WV-NV202 Camera
in the PODV7 Housing
Install the quick release plate on top of the spacers already
installed in the housing. Note the orientation of the bracket.
The securing tab must be facing the front of the housing.
Secure the quick release plate into the housing using the (4)
#8 bolts and star washers provided in the packet assembly.
1.
Twist camera to secure
Attach the Camera
to the quick release
plate. Attach safety
lanyard to the back
of the camera.
Position the camera
as shown below on
the quick release
plate and twist
clockwise.
(Please see Pansonic Operation Manual for additonal details.)
2.
Complete wiring connections. Connect the RJ45 network
cable to into the network input. Complete power
connections.
Finish camera installation by securing the safety
locking tab.
3.
4.
Front
Securing Tab
Power Port
-
+