Filter
Top Products
42
VCR Mode
Playing Back
The recorded scene can be played back immediately after
recording.
1 Rotate the [OFF/ON/MODE] Switch and set the
Palmcorder in the VCR Mode.
≥The [VCR] Lamp lights up. 1
2
Press the [6] Button to rewind the tape.
≥Rewind the tape to the point where you want to start playback.
≥When the tape reaches the beginning, rewinding stops
automatically.
3 Press the [1] Button to start playback.
To Stop Playback
Press the [∫] Button 2.
≥If a cassette recorded with copyright protection signals is played
back, the screen becomes blue or mosaic-like noise patterns
appear.
ªAdjusting the Sound Volume
Until the [VOLUME] Indication 3 appears, keep pressing the
[PUSH] Dial
4. Then, rotate the [PUSH] Dial to adjust the volume.
After the adjustment, press the [PUSH] Dial to make the [VOLUME]
Indication disappear.
To adjust the volume with the Remote Controller, press the [T] or [W]
Button to display the [VOLUME] Indication. Press the [T] Button to
increase the volume or press the [W] Button to decrease the volume.
The [VOLUME] Indication goes off 2 or 3 seconds after the
adjustment is finished.
≥When the Playback Zoom Function is in use, the sound volume
cannot be adjusted.
≥For other notes, see page 88.
3
1
1
4
CAMERA
VCR
CARD
P.B
O
F
F
O
N
M
O
D
E
PUSH
MF / VOL / JOG
W.B / SHUTTER / IRIS
SEARCH
BACK
LIGHT
FADE
MAGIC
PIX
3
2
2
PV-GS50P.book 42 ページ ２００３年２月１７日 月曜日 午後６時３０分