Filter
Top Products
40
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Digital Still Camera
Insert a captured still image into the
current recording, or vice versa, in one of
three wipe effects.
1 Repeat steps 1-4 on page 39 to set
Picture in Picture Wipe title.
2 Press (MODE) repeatedly for Wipe
effect 1, 2, or 3 (See left).
• WIPE 1 will flash for a while to store
the image for the wipe.
3 Start recording (page 17).
4 Press (START) :
once ➞ inserts captured image.
twice ➞ inserts current recording
picture.
• You can freeze the wipe in progress
by pressing
(START). Press
(START) again to resume wipe.
Digital Wipe Mode
Note:
• If Memory Card is not inserted, “NO
CARD” appears on-screen. Set Power to
OFF, then insert the Memory Card.
• Pictures captured with other brand
products cannot be used with this
Camcorder.
• If “INCOMPATIBLE IMAGE” appears on-
screen, the size of the captured image
cannot be played back on this Camcorder.
• If “CARD ERROR” appears on-screen,
see page 56.
• If Digital Wipe mode is selected, the
following functions are not available:
MotionSensor, Auto Fade, Digital Fade,
Color Digital Filter, Digital Zoom, Digital
E.I.S., Still/Strobe/Wide.
Before you begin...
• Connect Camcorder to power source.
• Insert the Memory Card (optional, page 34).
• Set POWER to CAMERA.
3
24
STARTMODE
07.L453 DSC p39-40 02.11.28, 2:46 PM40