Filter
Top Products
13
VQT2L14
Quick Guide
∫ Inserting the battery
Install the battery by inserting it in the
direction shown in the figure.
∫ Charging the battery
1 Connect the AC adaptor to this unit’s
DC input terminal.
2 Connect the AC cable to the AC
adaptor, then the AC outlet.
≥ For the AC cable, plug in 2 and then 3.
∫ Inserting/removing an SD card
1) Open the LCD monitor.
2) Open the SD card cover and insert
(remove) the SD card into (from) the
card slot.
≥ Face the label side B in the direction
shown in the illustration and press it
straight in as far as it will go.
≥ Press the center of the SD card and then
pull it straight out.
3) Securely close the SD card cover.
∫ How to turn on the power
Turning the power on and off with the
power button
Press the power button to turn on the power.
A The status indicator lights.
≥ To turn off the power, hold down the power
button until the status indicator goes off.
Turning the power on and off with the
LCD monitor
Power is turned on when the LCD monitor is
opened, and power is turned off when it is closed.
∫ To turn on the power
A The status indicator lights.
∫ To turn off the power
B The status indicator goes off.
Access lamp [ACCESS] A
≥ When this unit is accessing the SD
card or built-in memory, the access
lamp lights up.
A Insert the battery until it clicks and
locks.
SDR-H85&S50&T55&T50-VQT2L14_eng.book 13 ページ ２００９年１２月２２日 火曜日 午前１０時３３分