Filter
Top Products
94
LSQT1488
Problem Check points
A clicking sound is heard
when the power is turned
off.
≥ This is the sound of the lens moving and is not a
malfunction.
The screen has changed
suddenly.
(Demo mode is on)
≥ If you set [DEMO MODE] to [ON] without inserting an SD
card in video recording mode or picture recording mode,
the unit is automatically set to the demonstration mode for
introducing its functions. Normally this should be set to
[OFF]. (l 27)
A function indication
such as the remaining
time indication or the
elapsed time indication is
not shown.
≥ If you set [SETUP] > [DISPLAY] > [OFF], indications
other than warnings and date are not displayed.
Recording does not start
although power is
supplied to this unit.
≥ No recording is possible while the SD card’s write protect
switch is set to LOCK. (l 20)
≥ If the SD card has no more available memory, free up some
memory by deleting unnecessary scenes (l 58) or use a
new SD card.
≥ Is the unit set to the video recording mode or picture
recording mode?
≥ If the SD card slot cover is open, this unit may not operate
normally. Close the card slot cover.
SDR-S26P_PC-LSQT1488_mst.book 94 ページ ２００９年２月６日 金曜日 午後４時０分