Filter
Top Products
22
VQT2L26 (ENG)
Recording
Recording (Basic)
2
Recording motion
pictures
≥ Open the lens cover before turning the unit on. (l 9)
1 Change the mode to and
open the LCD monitor.
2 Press the recording start/stop
button to start recording.
≥
When you begin recording,
;
changes to
¥
.
≥
While recording is in progress, the recording
will not stop even if the LCD monitor is closed.
3
Press the recording start/stop
button again to pause recording.
∫ Screen indications in the
motion picture recording mode
A Recording mode
B Remaining time left for recording
(When the remaining time is less than
1 minute, [R 0h00m] flashes red.)
C Recording time elapsed
Each time the unit is put into recording
pause, the counter display will be reset
to “0h00m00s”.
≥ Still pictures can be recorded while
recording the motion picture.
≥ The images recorded between pressing
the recording start/stop button to start
recording and pressing it again to pause
recording become one scene.
The scene is automatically divided when
the recorded data exceeds 1.9 GB. (The
recording will continue.)
Normal recording mode:
SD CARD
Maximum number of recordable scenes: 9801
Maximum number of different dates: 99
(In the case of SD cards it is the maximum
number of recordable scenes per card.)
Built-in Memory/HDD
/
Maximum number of recordable scenes:
98901
Maximum number of different dates:
999
Long recording mode:
Maximum number of recordable scenes:
89100
Maximum number of different dates:
99
When either of them reaches to the maximum
limit, additional scenes cannot be recorded.
0h00m00s0h00m00s0h00m00s
1 20201 20
SP
0h00m00s0h00m00s0h00m00s
R 1h20mR 1h20mR 1h20m
SP
SDR-T50
SDR-H85
SDRS50&T50&H85EP-VQT2L26_mst.book 22 ページ ２００９年１２月２０日 日曜日 午前１１時１分