Filter
Top Products
108
VQT2N91
When carrying the unit, do not drop or
bump it.
≥ A strong impact can break the unit’s
casing, causing it to malfunction.
Cleaning
≥ Before cleaning, detach the battery or pull
the AC cable from the AC outlet, and then
wipe the unit with a soft, dry cloth.
≥ If the unit is very dirty, dip a cloth in water
and squeeze firmly, and then wipe the unit
with the damp cloth. Next, dry the unit with
a dry cloth.
≥ Use of benzine, paint thinner, alcohol, or
dishwashing liquid may alter the camera
body or peel the surface finish. Do not use
these solvents.
≥ When using a chemical dust cloth, follow
the instructions that came with the cloth.
Do not use the unit for surveillance
purposes or other business uses.
≥ This unit was designed for consumer
intermittent use. It was not intended for
continuous use, or for any industrial or
commercial application resulting in
prolonged use.
≥ In certain situations, continuous use could
cause the unit to overheat and cause a
malfunction. Such use is strongly
discouraged.
When you are not going to use the unit
for an extended time
≥ When storing the unit in a cupboard or
cabinet, it is recommended that you place
a desiccant (silica gel) in with it.
///
When disposing of or giving away this
unit, note that:
≥ Formatting and deletion simply change the
file management information and cannot
be used to completely erase the data in
built-in memory or HDD of this unit. The
data can be recovered using commercially
available software or the like.
≥ We recommend that you physically format
the built-in memory or HDD before
disposing of or giving away this unit.
≥ /
To physically format the built-in memory,
connect the unit via the AC adaptor, select
[FORMAT MEDIA] # [Built-inMemory]
from the menu, and then press and hold
the delete button on the screen below for
about 3 seconds. When the built-in
memory data deletion screen appears,
select [YES], and then follow the
on-screen instructions.
≥ /
To physically format the HDD, connect the
unit via the AC adaptor, select [FORMAT
MEDIA] # [HDD] from the menu, and then
press and hold the delete button on the
screen below for about 3 seconds. When
the HDD data deletion screen appears,
select [YES], and then follow the on-
screen instructions.
≥ Please look after the data in your built-in
memory or HDD carefully. Panasonic will
not be held responsible in the unlikely
case that private data is divulged.
SDR-T55
SDR-T50
SDR-H95
SDR-H85
SDR-T55
SDR-T50
SDR-H95
SDR-H85