Filter
Top Products
29
Installing SD-MovieStage (Cont.)
8
Click the [YES] Button.
≥The necessary software for the SD-MovieStage is installed.
9
Click [Yes] Button to create the short-cut icon on the
desktop.
10
At the end of the Setup, click on the [Finish] Button.
≥After rebooting the computer, the SD MovieStage is enabled.
≥For the information of the operation of SD-MovieStage, refer to the
instruction in the PDF file that was installed together with this
software. Adobe
®
Acrobat
®
Reader
®
(refer to http://
www.adobe.com/) is required to read PDF files.
≥The screen image inserted into this manual is captured from
English version.
ªCautions for Windows XP/2000 Professional
When installing or using this software, specify the user name to
[Administrator (computer administrator)] or any other user name having
the equivalent right. Then log on with that user name to install this
software.
(If you don't have such a right, consult with your system administrator).
Starting SD-MovieStage
The step below starts the SD-MovieStage. Please read the PDF-based
Instructions for using the SD-MovieStage.
1
Select [Programs] >> [Panasonic] >> [SD-MovieStage]
>> [SD-MovieStage] from the Windows start menu.
≥SD-MovieStage will start.
≥If you use Windows 98SE, install Panasonic Media Manager (supplied
accessory) before using the SD-MovieStage.
Others
Notes & Precautions
ªCharge the built-in battery for maintaining the date
information.
This built-in battery is used for the memory of date and time. If [0] is
displayed when the power is on, the built-in battery may be exhausted.
Charge using the following procedure:
1
Take the battery out and plug in the AC adapter (l 6).
2
Turn the power off and leave this SD Multi AV Device as
it is for about 12 hours.
ªAfter Use.
1
Turn off the SD Multi AV Device.
2
Take out the Card.
3
Detach the power supply and retract the LCD Monitor
.
4
Put the SD Multi AV Device into the Carrying Case.
10
8
9
DC IN 4.8V