Filter
Top Products
Troubleshooting
Others
153
LSQT1025
Problem Check points
Scenes cannot be deleted
or edited.
≥ Is the DVD-RAM or the DVD-RW (VR format) write-
protected?
# Release the protection. (l 108)
If the disc or the contents on the disc have been protected on
another device, release the protection on the same device.
≥ It may not be possible to delete scenes that have been
divided.
# Combine the divided scenes, and then delete them. (l 90)
≥ Scenes displayed as thumbnails in shades of blue and
white may not be deleted. If the scenes are unnecessary,
format the disc or card to erase the data. (l 104, 105)
Please be aware that if a disc or card is formatted then all
the data recorded on the disc or card will be erased.
≥ Is the file on the SD card locked?
# Locked files cannot be deleted. Release the lock setting.
(l 102)
≥ If the SD card’s write protect switch is set to LOCK, then
deletion is disabled. (l 23)
The images on the SD
card do not look normal.
≥ The data may be destroyed. It may have been destroyed by
static or electromagnetic waves. Store important data on a
computer or other products as well.
Even if a disc or a card is
formatted, it cannot be
used.
≥ Either this unit or the disc or card may be damaged. Please
consult a dealer. Use an SD Memory Card from 8 MB to
2 GB with this unit.
The indication
disappears.
The screen is frozen.
No operation can be
performed.
≥ Is this unit connected to a computer?
# No operation can be performed on this unit when it is
connected to a computer.
≥ Turn off the power to this unit. If the power cannot be
turned off, press the RESET button, or remove the battery
or AC adaptor and then reattach it. After that, turn on the
power again. If normal operation is still not restored,
detach the power connected, and consult the dealer who
you purchased this unit from.
LSQT1025(ENG).book 153 ページ ２００６年２月４日 土曜日 午後６時１０分