Filter
Top Products
50
LSQT1161
Recording
≥ In the following cases, the tele macro function
is cancelled.
jThe zoom magnification becomes lower than
10k.
jThe power is turned off or the mode dial is
operated.
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
This function allows you to record colour subjects
in dark locations to stand out against the
background.
Attach this unit to a tripod, and you can record
images free from vibration.
≥ Minimum required illumination: approx. 1 lx
(VDR-D310)/approx. 2 lx (VDR-D220)
≥ Recorded scene is seen as if frames were
missed.
¬Rotate the mode dial to select .
1 Press the joystick. Then move
the joystick down to display the
icon shown in the illustration.
2 Move the joystick up to select
[].
≥ If it is difficult to focus, adjust the focus
manually. (l 53)
To cancel the colour night view function
Select [ ] again.
≥ The colour night view function makes the
signal charging time of CCD up to
approximately 25k longer than usual, so that
dark scenes can be recorded brightly. For this
reason, bright dots that are usually invisible
may be seen, but this is not a malfunction.
≥ If you turn off the power or operate the mode
dial, the colour night view function is cancelled.
≥ If set in a bright place, the screen may become
whitish for a while.
(SD)
You can record still pictures on an SD card using
the timer.
¬Rotate the mode dial to select .
1 Press the joystick. Then move
the joystick down to display the
icon shown in the illustration.
2 Move the joystick left to select
[Ø].
3 Press the button.
After the [Ø] display flashes for approx.
10 seconds, a still picture will be recorded.
≥ After recording, the self-timer is cancelled.
Colour night view function
This allows recording in dark
locations.
2/2
2/2
NEXT
NEXT
2/2
NEXT
2/2
2/2
NEXT
NEXT
2/2
NEXT
Self-timer recording
This is for recording shots of yourself
as well.
1/2
1/2
NEXT
NEXT
1/2
NEXT
1/2
1/2
NEXT
NEXT
1/2
NEXT
LSQT1161_GN.book 50 ページ ２００７年１月１９日 金曜日 午後１時８分