Panasonic VQT3R48 Camcorder User Manual


 
- 81 -
Recording
Blurring above and below or to the left and right of the set range, it will look as though the
picture was of a miniature.
1 Select [MINIATURE EFFECT] using Step 2 on P80 and then press [MENU/SET].
2 Press 4 to display the setting screen.
A frame around the area not to be blurred will display.
3 Adjust the position and size of the frame and then press [MENU/SET] to set.
Note
Display of the recording screen will be delayed more than usual and the screen will look as if
frames are being dropped.
No sound is recorded in motion pictures.
Approximately 1/10 of the time period is recorded. (If you record for 10 minutes, the resulting
motion picture recording will be approximately 1 minute long.)
The displayed available recording time is approximately 10 times. When switching to Recording
Mode, please check the available recording time.
Adjust the [MINIATURE EFFECT] settings
A When the frame is horizontal B When the frame is vertical
3/4 Move (up and down) Switch to A
2/1 Switch to B Move (left and right)
Enlarge and shrink
You can switch between three levels.
If you press [DISPLAY], the adjusted frame will return to the original values.
C Non-blurrable range