Filter
Top Products
- 60 -
Using the [Setup] menu
Item Settings, notes
[Rotate Disp.]
Automatically rotate
portrait still pictures.
: Rotate and display pictures displayed on a TV
screen as well as those displayed on the LCD
monitor of the camera in portrait orientation.
: Rotate and display only pictures displayed on a TV
screen in portrait orientation.
[OFF]
• [Rotate Disp.] cannot be used with motion pictures.
• Still pictures taken with the lens surface facing up or
down, or still pictures taken on other cameras may not
rotate.
• Pictures cannot be rotated during Multi Playback.
• Will only be displayed rotated on computer if in Exif-
compatible (→42) environment (OS, software).
[Version Disp.]
Check the camera
firmware version
or display software
information.
Current version is displayed.
• When you press [MENU/SET] while the version is
displayed, software information such as the license is
displayed.
[Format]
Use when [Built-In
Memory Error] or
[Memory Card Error]
appears, or when
formatting the built-in
memory or card.
When a card/built-in
memory is formatted,
the data cannot be
restored. Check the
content of the card/
built-in memory
carefully before
formatting.
• This requires a sufficiently charged battery. When
formatting the built-in memory, remove the cards.
(Only inserted card will be formatted if present; built-in
memory will be formatted if no card is inserted.)
• Always format cards with this camera.
• All data including protected pictures and copied map
data will be deleted.
DMC-ZS20
• All protected pictures and other picture data will be
deleted.
DMC-ZS19
• Do not turn off power or perform other operations during
formatting.
• Formatting the built-in memory may take several
minutes.
• If the card cannot be formatted, please try another card
before contacting your nearest Service Center.
For USA and Puerto Rico assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: lumixconcierge@ca.panasonic.com
• For details about the setting procedure in the [Setup] menu (→51)