Filter
Top Products
-16-
■ Image Adjustment
You can manually adjust the pan/tilt/azimuth angles,
focus, and zoom while observing the connected moni-
tor.
Notes:
• Do not hold the camera by lens unit to adjust pan-
ning, tilting, or azimuth.
• The video output to the BNC will be interrupted
while an LCD monitor is connected to the video
jack.
Tilting lock screw
(stainless)
Pan lock screw
(stainless)
Panning table
Variable angles
plus or minus 75 °
(max.)
1. Connect an LCD monitor to the video jack.
2. Pan/tilt/azimuth adjustment
• Loosen the two screws locking the pan and tilt
tables.
• Pan and tilt the table to aim the camera at what you
need to watch.
• Turn the azimuth adjuster to obtain a level image.
• Tighten the two screws after adjusting.
Azimuth adjuster