Panasonic WV-NF302 Security Camera User Manual


 
5
<Refresh interval (MPEG-4)>
When "On" is selected for "MPEG-4 transmission"
JPEG (VGA or QVGA): 15 fps
JPEG (1 280 x 960): 5 fps
When "Off" is selected for "MPEG-4 transmission"
JPEG (VGA or QVGA): 30 fps
JPEG (1 280 x 960): 11 fps
The refresh interval may be longer depending on a
network environment, PC spec, photographic sub-
ject, access traffic, etc.
Refer to the following page for further information about
the "Live" page.
About the "Live" page
q [Setup] button *
1
Click this button to display the setup menu. The but-
ton will turn green and the setup menu will be dis-
played.
w [Live] button
Click this button to display the "Live" page. The but-
ton will turn green and the "Live" page will be dis-
played.
e Multi-screen buttons
Images from multiple cameras can be displayed on
a multi-screen by registering cameras on the setup
menu. ( page 8)
r Image type buttons
: The letters "MPEG-4" on the button will
turn green and an MPEG-4 image will be
displayed. When "Off" is selected for
"MPEG-4 transmission" on the setup
menu, the [MPEG-4] button will not be dis-
played. ( Setup Instructions)
: The letters "JPEG" on the button will turn
green and JPEG image will be displayed.
w [Live] button
e Multi-screen buttons
q [Setup] button
r Image type buttons
t Image capture size buttons
i AUX buttons
u Brightness buttons
y Zoom buttons
!1 Camera title
!3 Full screen button
!2 Alarm occurrence indi-
cation button
!5 Mic input button
!6 Audio output button
!4 One shot button
!8 Main area
o [SD] button
!0 [List] button
!7 SD recording status
indicator