Pelco AV3100 Security Camera User Manual


  Open as PDF
of 6
 
Page 4 of 6 C1001RN (9/08)
Arecont Vision AV3130
NOTES:
• To capture images larger than 2 MP, you must install Integral IP camera driver 6.7.0.5
or later and then Megapixel Support for DS Server/VAU 4.1. To obtain a copy of all
necessary software versions, go to
www.pelco.com
.
• To view images larger than 2 MP, you must install Megapixel Support for DS Client/
Admin 4.1 and DS ControlPoint 6.5.1.28 or later. To obtain a copy of all necessary
software versions, go to
www.pelco.com
.
• Short communication delays (2–3 minutes) could occur when you use Digital Sentry
to change the configuration of AV3130. The number and frequency of delays can be
decreased by combining multiple configuration changes into as few groups as
possible.
• When configuring AV3130 in DSAdmin, three different drivers are available including
one each for Day, Night, and Automatic modes. The selected driver must match the
mode selected in the camera’s software.
Firmware 62315
Supported Resolutions Day mode:
1920 x 1200, 960 x 600
Night/Automatic mode:
1280 x 1024, 640 x 512
FPS 1–20
Number of Quality Settings 21
Supported Codec MJPEG
Supported Motion Detection Integral
Pan/Tilt/Zoom (PTZ) Not available
 previous next