Pelco AV3130 Security Camera User Manual


  Open as PDF
of 6
 
C1001RN (9/08) Page 3 of 6
Arecont Vision AV3100
NOTES:
• To capture images larger than 2 MP, you must install Integral IP camera driver 6.7.0.5
or later and then Megapixel Support for DS Server/VAU 4.1. To obtain a copy of all
necessary software versions, go to
www.pelco.com
.
• To view images larger than 2 MP, you must install Megapixel Support for DS Client/
Admin 4.1 and DS ControlPoint 6.5.1.28 or later. To obtain a copy of all necessary
software versions, go to
www.pelco.com
.
• Short communication delays (2–3 minutes) could occur when you use Digital Sentry
to change the configuration of AV3100. The number and frequency of delays can be
decreased by combining multiple configuration changes into as few groups as
possible.
• In-camera motion detection on AV3100 is less sensitive at lower resolutions. It is
recommended that Integral motion detection be used at lower resolutions with this
camera.
Firmware 62414
Supported Resolutions 1920 x 1200, 960 x 600
FPS 1–22
Number of Quality Settings 20
Supported Codec MJPEG
Supported Motion Detection Integral, In-Camera
Pan/Tilt/Zoom (PTZ) Not available
 previous next