Pelco AV5100 Security Camera User Manual


  Open as PDF
of 6
 
C1001RN (9/08) Page 5 of 6
Arecont Vision AV5100
NOTES:
• To capture images larger than 2 MP, you must install Integral IP camera driver 6.7.0.5
or later and then Megapixel Support for DS Server/VAU 4.1. To obtain a copy of all
necessary software versions, go to
www.pelco.com
.
• To view images larger than 2 MP, you must install Megapixel Support for DS Client/
Admin 4.1 and DS ControlPoint 6.5.1.28 or later. To obtain a copy of all necessary
software versions, go to
www.pelco.com
.
• Short communication delays (2–3 minutes) could occur when you use Digital Sentry
to change the configuration of AV5100. The number and frequency of delays can be
decreased by combining multiple configuration changes into as few groups as
possible.
• In-camera motion detection will be supported on AV5100 in a later release.
Firmware 62406
Supported Resolutions 2560 x 1920, 1280 x 960
FPS 1–16
Number of Quality Settings 20
Supported Codec MJPEG
Supported Motion Detection Integral
Pan/Tilt/Zoom (PTZ) Not available
 previous