Filter
Top Products
Page 6 of 6 C1001RN (9/08)
Arecont Vision AV8180 and AV8360
NOTES:
• The frame rate and quality for all four camera sensors (heads) must be set to the
same value.
• AV8180 and AV8360 do not have a configuration Web page.
• AV8180 and AV8360 do not support in-camera motion detection. Using Integral
motion detection at 1600 x 1200 resolution can significantly reduce the performance
of the Digital Sentry system. To use Integral motion detection, it is recommended
that you select 800 x 600 resolution.
• AV8180 camera input numbers are not in the same order as their physical locations
on the camera.
Contact Information
Pelco Worldwide Headquarters
3500 Pelco Way, Clovis, California 93612 USA
USA & Canada: Tel: (800) 289-9100, Fax: (800) 289-9150
International: Tel: +1(559) 292-1981, Fax: +1(559) 348-1120
www.pelco.com
Document Revision History
Firmware 62410
Supported Resolutions 1600 x 1200, 800 x 600
(per sensor) x4
FPS 1–22
Number of Quality Settings 20
Supported Codec MJPEG
Supported Motion Detection Integral
Pan/Tilt/Zoom (PTZ) Not available
Document # Date Comments
C1001RN 9/08 Original version.
Pelco, the Pelco logo, and Digital Sentry are registered trademarks of Pelco, Inc.
© Copyright 2008, Pelco, Inc. All rights reserved.