Filter
Top Products
4 Pelco Manual C1496M-A (2/02)
HARD CEILING INSTALLATION
1 PREPARE CEILING
Locate the center point of the mounting location. Drill a hole in the ceiling using a 3/32-
inch drill. Insert the compass tool into the hole. Use a pencil and the compass tool to
draw a circle on the ceiling. Carefully cut out the circle.
2 INSTALL THE BACK BOX
Attach the conduit fitting, lock nut, and safety chain bracket. Install a safety chain/
cable (not supplied) that will support up to 16 pounds (7.3 kg). Install one end of the
safety chain/cable to the safety chain bracket and the other end to a support structure
in the ceiling.
Prepare the wiring for camera and lens power; refer to Tables A and B for wiring
distances. Pull wiring into the back box through the conduit fitting.
Compress the spring clips on the back box and push it through the hole until the clips
spring back. Tighten the screws until you hear a clicking noise.
20116
20120
20122
20124
ATTACH SAFETY CHAIN HERE
20125
CEILING
20126
CEILING
20127