Filter
Top Products
2 Pelco Manual C1455SM-C (5/00)
DESCRIPTION
This maintenance/service manual consists of exploded assembly diagrams and parts lists.
Use this manual when ordering replacement parts for Spectra
®
domes in the SD5 Series.
BACK BOX ELECTRONIC ASSEMBLY REMOVAL
To remove the back box electronic assembly:
1. Turn off power.
2. Open the interconnect door and disconnect all wiring to the back box.
3. Use an 11/32 socket driver to remove the three 8-32 washers and nuts that hold the
electronic assembly to the back box. When the screws are removed, the interconnect
back box receptacle will drop down.
It may be necessary to move the open interconnect door past 90° vertical toward the
side of the back box to release the door from the built-in grounding strip (and free the
interconnect back box receptacle).
4. Remove the interconnect back box receptacle with the electronic components from the
back box.