Filter
Top Products
IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1. Installation and servicing should only be done by qualified service personnel and conform
to all local codes.
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure,
it is designed for indoor use only and it must not be installed where exposed to rain and
moisture.
3. Only use replacement parts recommended by Pelco.
4. The camera and lens combination shall not exceed 3.5 pounds (1.59 kg), unless the
E2020 is used.
5. The maximum camera and lens combination is 10 pounds (4.5 kg) if the E2020 is used.
6. The installation method and materials should be capable of supporting four times the
weight of the enclosure, pan/tilt, camera and lens combination.
The product and/or manual may bear the following marks:
C1493M-A (8/99)
EH2020 Security-Rated
Ceiling Enclosure
3500 Pelco Way,
Clovis, CA 93612-5699
USA
In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150
International Customers:
Tel (1-559) 292-1981
FAX (1-559) 348-1120
www.pelco.com
®
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompa-
nying this unit.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
Please thoroughly familiarize yourself with the information in this manual prior to installation
and operation.
DESCRIPTION
The EH2020 is a small, low-profile ceiling enclosure designed for mounting in fixed or dropped
ceilings. It is used for indoor applications only. The unobtrusive, compact design complements
any business or office decor and provides maximum discreet surveillance.
The EH2020 is constructed of steel and is engineered for ease of installation and service. The
back box is mounted above the ceiling and can be mounted directly on a ceiling tile with the
use of two soft-ceiling mounting brackets (included).
The lid is attached to the back box with two tamper-proof screws and is retained by a leash
when removed. When removed, It provides convenient access for adjusting the camera and
lens. The enclosure has an adjustable camera mounting sled to accommodate cameras of
varying sizes.
The EH2020 has an optically clear, impact-resistant Lexan
®
viewing window which allows no
loss of light to the lens and camera.
INSTALLATION
The following items are supplied:
1 EH2020 enclosure
1 Hex key for tamper-resistant screws
1 Thumbscrew, 1/4-20 x 1/2-inch (for camera mounting)
2 Soft-ceiling mounting brackets