Filter
Top Products
Pelco Manual C1937M-C (4/03)
[
9
]
7 NOR/SHP - Sharpness
NOR (Default setting) - Sets the camera to normal sharpness mode.
SHP - Enables the Sharpness mode. Enhances picture detail by increasing the aperture gain of the
camera, sharpening the edges in the picture. In some scenes, the SHP mode will increase edge
noise on your monitor.
8 LC - Long Line Compensation
OFF (Default setting) - Disables the Long Line Compensation mode.
LC - Enables the Long Line Compensation mode. Boosts the video drive level to 1.25 Vp-p for long
line transmission. Use only if your wiring is causing video signal deterioration.
9 EDR - Extended Dynamic Range
OFF (Default setting) - Disables the EDR mode.
EDR - Enables the EDR mode to help balance a scene with a large dynamic range. Use this
feature to improve the picture in washed-out areas. This feature adds 12X the dynamic range, but
also increases dark area picture noise. See page 10 for further details.
10 AW1/AW2 - Automatic White Balance
AW1 (Default Setting) - Automatically processes the viewed image to retain color balance over a
wide color temperature range.
AW2 - Processes the viewed image to retain color balance in a restricted color temperature range.
Use only when AW1 causes an unbalanced color picture.