Filter
Top Products
C2924M-A (5/05) 21
Accessing Setup Menus
NAVIGATING SETUP MENUS FROM THE REAR PANEL
You can use the five-position button on the rear panel to access and navigate the setup menus (refer to Figure 10).
Figure 10. Rear Panel Indicators and Presses
Table E lists the button presses for each menu action.
To display a menu:
1. Press and hold the button for two seconds to open the MAIN MENU. The four indicators on the rear panel blink until you close the setup
menu.
2. Press the button up or down to select a menu.
3. Press the center of the button to open the menu.
To change a setting:
1. Press the button up or down to select the item.
2. Press the center of the button to open the item.
3. Press the button up or down to move through the options.
4. Press the center of the button to save the setting and return to the menu.
To move to a previous menu, select BACK and press the center of the button.
To close the setup menus, select EXIT from any menu and press the center of the button.
NOTES:
• When you select BACK or EXIT on any menu, the camera saves the current settings into memory.
• The menu closes automatically after three minutes of inactivity.
Table E. Rear Panel Buttons and Actions
MENU ACTION BUTTON ACTION
Enter setup menus. Long center press
Move up or down in menu or item options. Up or down press
Move right or left in menu. Right or left press
Select menu or item. Short center press
Save setting and exit to menu. Short center press
UP
RIGHT
DOWN
LEFT
SELECT