Filter
Top Products
10 C3605M-A (5/09)
Operation
RUN A PROFILE
To run the Camera Sabotage profile:
1. While viewing video on the WS5000, right-click the video pane, and then select Analytics from the
shortcut menu.
2. On the Analytics submenu, locate and select the profile that you created for the Camera Sabotage
behavior. A green check mark indicates that a profile is running. Starting a profile deactivates any
other profile that is running; only one profile can run at a time.
Figure 8. Analytics Menu
SHOW OR HIDE ANALYTICS
The Camera Sabotage behavior tracks and displays results in the WS5000 video pane. For example, a red
box appears in the video pane each time an alarm is triggered. To show or hide the results for the behavior:
1. Right-click the video pane to display the shortcut menu.
2. Select Analytics, and then select Hide Analytics from the submenu. The results are removed from
the video pane. To show these results, select Show Analytics from the submenu.
STOP ANALYTICS
To stop the currently running profile:
1. Right-click the video pane to display the shortcut menu.
2. Select Analytics, and then select Stop Analytics from the submenu. Selecting a different profile will
stop the currently selected profile.
RESET ALARM
To reset an alarm manually:
1. Right-click the video pane to display the shortcut menu.
2. Select Analytics, and then select Reset Alarm from the submenu.