Filter
Top Products
Pelco Manual C458M-B (1/98) 25
7.0 SPECIFICATIONS
MECHANICAL
Pan: Movement in horizontal plane:
0-355° with pan limit stops
360° without pan limit stops
Tilt: -90° movement from horizontal plane
Pan and Tilt
Speeds: The following speeds are available and pre-selected by cus-
tomer at time of order:
Dome Drive
Type Pan Speed Tilt Speed
DD14B1L 12°/sec ± 1° 6°/sec ±.5°
DD14B1L-H
DD14C1L
DD14C1L-H
DD14D1L
DD14B2L 24°/sec ± 1° 12°/sec ±.5°
DD14B2L-H
DD14C2L
DD14C2L-H
DD14D2L
DD14E2L
DD14C3L Variable (0 – 100°/sec) 0–40°/sec ±.5°
DD14E3L
Motors: Synchronous, continuous duty, instantaneous reversing
(models with fixed pan speed)
Stepper (models with variable pan speed)
Maximum
Camera/Lens
Length: Approx. 4.7" W x 3.2" H x 11.5" L (11.94 cm x 8.13 cm x 29.21 cm),
including BNC cable connection to camera
Connectors
Video: BNC
Lens: Hirschmann 6-pin (mate supplied) for non-preset models
AMP CPC 9-pin (mate supplied) for preset models
Camera Power: Spade lugs
Gearing: Spur gear
Bearings
Pan: Roller thrust bearings and Oilite bronze bushing
Tilt: Sealed ball bearing
Braking: Models with fixed pan speed: Friction
Models with variable pan speed: Magnetic locking