Filter
Top Products
Pelco Manual C538M-A (3/04) 23
6.0 SPECIFICATIONS
ELECTRICAL
REL UNIT RELAY CONTACTS**
Parameters: Maximum Switching Capacity 60 Watts
Maximum Operating Voltage 125V AC/DC
Maximum Current 2 Amps
Contact Resistance 75 m ohms
Rated Load
Parameters: .5A @ 125 VAC
2A @ 30 VDC
REL UNIT
Input Voltage: Auto-ranging 100-240 VAC 50/60 Hz
Power: Consumption: 30 vA, 5 watts
Data Ports
Input: RS-422, RJ-45 connector
DIP switch selectable baud-rate.
Output: RS-422, RJ-45 connector.
DIP switch selectable baud rate
Output: RS-232, DB-9 connector
Indicators: 2 power LEDs, green
1 data LED, red
Fusing: 500 mA, 250V
GENERAL
Dimensions: 17.4" W x 1.73" H x 8.54" D (44.2 cm x 4.39 cm x 21.69 cm)
Operating
Temperature: 32°F to 122°F (0°C to 50°C)
Weight: 8 lb (3.63 kg)
MECHANICAL
Connectors
REL Input: Four dual-header, 32 input connectors with mating plugs
Power: 3-wire, #18 AWG
RS422: Two RJ-45 connectors
RS-232: One DB-9 connector (factory use only)
Relay out: One 3-pin header with mating plug
** For information regarding additional specified, known parameters, refer to speci-
fication sheets for relay type G6SK-2F-H from OMRON, if necessary.
(Design and product specifications subject to change without notice.)