Filter
Top Products
C1984M-F-ML (3/05) 11
ENGLISH
Specifications
GENERAL
CCD Sensor 1/3-inch interline transfer
Picture Elements
CC3551H-2 768 (H) x 494 (V)
CC3651H-2X 795 (H) x 696 (V)
Sensing Area 6 mm diagonally
Synchronize System INT/AC line lock
Horizontal Resolution
CC3551H-2 480 TV lines
CC3651H-2X 470 TV lines
Iris Control Electronic/passive
Minimum Illumination
CC3551H-2 0.035 lux at f1.2, 50 IRE
0.02 lux at f1.2, 35 IRE
CC3651H-2X 0.01 lux, f1.2, 40 IRE, AGC on, 75% reflectance
ESC 1/60-1/100,000 second
Signal-to-Noise Ratio 50 dB (AGC off)
Gain Control Automatic
Vertical Phase Adjustable 340°
Backlight Compensation Selectable by DIP switch setting
Scanning System
CC3551H-2: 525 lines, 2:1 interlace
CC3651H-2X: 625 lines, 2:1 interlace
Signal Processing DSP with microprocessor control
Auto Iris Lens Type DC/video control, selectable by DIP switch position
Video Output 1 Vp-p, 75 ohms
1.2 Vp-p for long-line transmission
ELECTRICAL
Power Requirements
24 VAC 18-30 VAC
12 VDC 10-36 VDC
Power Consumption 3.3 watts maximum
5.4 vA maximum
Power Connector 2-pin terminal strip, push-in type
Video Connector BNC
Lens Jack 4-pin connector (miniature square)
MECHANICAL
Lens Mount C/CS mount (adjustable)
Camera Mount Use 1/4-20 screw, top or bottom of camera housing
ENVIRONMENTAL
Operating Temperature 14° to 122°F (-10° to 50°C)
Storage Temperature 14° to 158°F (-10° to 70°C)
PHYSICAL
Dimensions 2.48 (W) x 2.67 (H) x 4.33 (D) inches (6.3 x 6.8 x 11 cm)
Weight (without lens) 0.77 lb (0.35 kg)
(Design and product specifications subject to change without notice.)