Filter
Top Products
C2935M-QS (2/06) 4
MOUNT
The CCC1380UH Series camera can be mounted from either the top or bottom, depending on the
type of camera mount used in your installation. Use a standard 1/4-20 screw. The maximum thread
depth is 0.25 inches (6.4 mm).
POWER
Connect 12 VDC or 24 VAC power to the back of the camera using the supplied terminal block. Use
a Class 2 isolated power source for the CCC1380UH camera that can supply 12 VDC ±15% or 24
VAC ±15%, 50/60 Hz. Maximum power consumption is about 3.5 watts.
VIDEO
Connect a coaxial video cable to the BNC connector on the back of the camera.
DC IRIS LEVEL ADJUSTMENT
Select this option to adjust the electronic properties of the DC-drive auto iris lens to the auto iris
electronic properties of the camera. Perform this procedure before using the camera or each time
you change the lens.
To perform this procedure:
1. Focus the camera (refer to
Lens Focus
).
2. Aim the camera at a bright, flickerless scene.
3. Select DC IRIS LEVEL from the MAIN MENU.
4. Adjust the DC IRIS LEVEL value. The range is -20 to 20. The default is -8. Adjust for the best
image.
5. Press the center of the button to save the value.
6. Exit the MAIN MENU.
C2935M-QS web.fm Page 4 Friday, February 10, 2006 11:09 AM