Pelco CM3000 Camera Accessories User Manual


  Open as PDF
of 4
 
®
CM3000
Fixed Camera Mount
Installation/Operation
C230M Rev B (7/91)
1.0 WARNINGS Prior to installation and use of this product, the following WARNINGS should be
observed.
1. Installation and servicing should only be done by Qualified Service Personnel
and conform to all Local codes.
2. Installation shall be done in accordance with all local and national electrical
and mechanical codes utilizing only approved materials.
3. Use only installation methods and materials capable of supporting four times
the maximum specified load.
4. Use stainless steel hardware to fasten the mount to outdoor surfaces.
5. To prevent damage from water leakage when installing a mount outdoors on a
roof or wall, apply sealant around the bolt holes between the mount and mount-
ing surface.
The product and/or manual may bear the following
mark:
This symbol indicates that there are important operating and
maintenance instructions in the literature accompanying this
unit.
Pelco • 300 W. Pontiac Way, Clovis, CA 93612-5699 • USA • (800) 289-9100 or (1-559) 292-1981
FAX (800) 289-9150 or (1-559) 292-3827 • DataFax (800) 289-9108 or (1-559) 292-0435
International customers call (1-559) 292-1981 or FAX (1-559) 348-1120
Please thoroughly familiarize yourself with the information
in this manual prior to installation and operation.
LISTED
U
L
®
next