Filter
Top Products
2 Pelco Manual C230M Rev B (7/91)
2.0 DESCRIPTION The CM3000 is a fixed camera mount designed for use in the SB3-1 enclosure.
The CM3000 features an adjustable head which allows for mechanical positioning
of a camera/lens combination weighing up to 20 lbs.
3.0 INSTALLATION Installation of the mount should be done prior to installing the SB3-1 enclosure.
To install the mount in the enclosure, perform the following steps (see Figure 1):
1. Secure the CM3000 to the two (2) 1/4-20 studs installed in the top plate of the
back box with the 1/4-20 nuts and lock washers supplied.
2. Install the SB3-1 enclosure as described in the manual (C426M).
3. Install the camera/lens as described in the manual (C426M).
4. Select the position for the camera and tighten the appropriate fasteners.
5. Insert the dome into the drive wheels as described in the manual (C426M).
Align the viewing slot with the camera/lens.
6. Attach safety chain from dome to slot on the side of tilt table of the CM3000.
Figure 1. Installing the CM3000 in the SB3-1 Enclosure