Filter
Top Products
16 PELCO Manual C437M-B (9/95)
Enclosure
The following specifications apply to these models:
ED25-1, ED2520, ED2520-SL, ED2520-PP,
ED2520SL-PP, ED2620, ED2620-SL, ED27-1,
ED2720, ED2720-SL, ED2720SL-PP
Input Voltage: 120 VAC, 50/60 Hz
vA Required: 187 vA
Blower: 80 cfm at 13 watts
(continuous operation)
Heaters: Four (4) at40 watts each. Heaters
are thermostatically controlled
to activate ON @ 40°F (4.5°C)
and OFF @ 60°F (15.6°C)
Service Light: 7 watts
Pwr Cable Required: 3 conductor, 18 Awg
(not supplied)
The following specifications apply to these models:
ED2520-RX, ED2520-RX-3, ED2520-WX,
ED2520SL-RX, ED2520SL-WX, ED2520RX-PP,
ED2520SL-RX/PP, ED2720-RX, ED2720-RX-3,
ED2720-WX, ED2720SL-RX, ED2720SL-WX,
ED2720RX-PP, ED2720SL-RX/PP
Input Voltage: 120 VAC or 230 VAC, 50/60 Hz
vA Required: 247 vA
Blower: 80 cfm at 13 watts
(continuous operation)
Heaters: Four (4) at 40 watts each. Heaters
are thermostatically controlled
to activate ON @ 40°F (4.5°C)
and OFF @ 60°F (15.6°C)
Service Light: 7 watts
Pwr Cable Required: 3 conductor, 18 Awg
(not supplied)
11.0 SPECIFICATIONS
MECHANICAL
Pan/Tilt
Pan Rotation: 0-355° horizontal
0-360° horizontal (SL models only)
Pan Speed: 24°/sec ±1 degree (no load condition)
Tilt Rotation: -90° movement from horizontal
plane
Tilt Speed: 12°/sec ±.5 degree (no load
condition)
Gearing: Chain and direct drive
Bearings: Pan — Ball bearing and bronze
oilite bushings
Tilt — Bronze oilite bushings
Braking: Friction
ELECTRICAL
Pan/Tilt
Input Voltage: 24 VAC, 50/60 Hz
vA Required for Pan: 7.2 vA
vA Required for Tilt: 9.1 vA
Maximum Current: 2 amps per conductor
(SL models only)
Limit Switches: 5 amp, 250 VAC
Motors: Continuous duty reversing induc-
tion type
Power Cable
Conductor Requirements:
Pan/Tilt 10 conductors
Lens 6 conductors
Camera 2 conductors
Connectors
Pan/Tilt: Pre-wired AMP CPC, 37 pins
Lens:
Non-PP models: Hirschmann MAB6100, mate
provided
PP models: AMP CPC, 9 socket, mate pro-
vided
Video: Standard BNC
Camera Sync: Standard BNC
Camera Power: Spade lugs