Filter
Top Products
IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1. Installation and servicing should only be done by qualified service personnel and conform
to all local codes.
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P enclosure,
it is designed for indoor use only and it must not be installed where exposed to rain and
moisture.
3. Use only installation methods and materials capable of supporting four times the combined
weight of the enclosure/pan and tilt/camera/lens.
4. Only use replacement parts recommended by Pelco.
5. The camera and lens combination shall not exceed 10 pounds (4.5 kg).
The product and/or manual may bear the following marks:
Please thoroughly familiarize yourself with the information in this manual prior to installation and
operation.
C407M-C (10/99)
EH2100/EH2100P
Ceiling Enclosures
®
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompany-
ing this unit.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
3500 Pelco Way,
Clovis, CA 93612-5699
USA
In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150
International Customers:
Tel +1 (559) 292-1981
FAX +1 (559) 348-1120
www.pelco.com
DESCRIPTION
The EH2100 and EH2100P are low profile ceiling enclosures designed for mounting in hard or
suspended ceilings. Their compact design complements any business or office decor and pro-
vides maximum surveillance for fixed CCD camera applications.
The upper section mounted above the ceiling is constructed of aluminum to meet most fire code
requirements. The EH2100 has a riveted back box. The EH2100P has a fully welded and sealed
back box, which has been found suitable for use in return air-handling plenums by Underwriters
Laboratories, Inc.
The EH2100/EH2100P are engineered for ease of installation and service. Because of its light-
weight design, the upper section can be mounted directly on a ceiling tile without the use of
added support. A clear window provides for a discreet installation.
The lower section is hinged to provide convenient access for adjusting the camera and lens.
The adjustable camera mounting sled allows the camera to be positioned vertically or horizon-
tally, depending on the camera size.
Models
EH2100 Low profile ceiling enclosure with riveted back box for use with solid-state
CCD cameras; for use in hard or suspended ceiling applications
EH2100P Same as EH2100 except has fully welded and sealed back box