Filter
Top Products
MAINTENANCE
Regularly scheduled maintenance will prolong the operational life and appearance of the equipment.
Clean the outer surface of the enclosure and the inner surface of the viewing window with a non-
abrasive cleaning cloth and antistatic cleaner that is safe for use on acrylic plastic. Do not use
kerosene or similar substances that can scratch the surface.
Service Manual
If you need to service your unit, obtain a service manual in one of the following ways:
• Go to Pelco’s web site at ftp://www.pelco.com and find service manual C407SM.
• Contact Pelco’s Literature Department and request service manual C407SM.
SPECIFICATIONS
Mechanical
Camera Mounting: Adjustable camera sled capable of supporting a maximum weight of 10 lb
(4.53 kg). Sled can be adjusted horizontally or vertically
Maximum Camera
and Lens Size: Accepts camera and lens combinations (including BNC connector) up to
3 (H) x 10 (L) x 4 (W) inches (7.62 x 25.4 x 10.16 cm)
Ceiling Mounting: Upper section flange-mounted to fixed or suspended ceiling. Flange extend-
ers are provided for ceiling support.
Cable Entry: Conduit knockouts, EH2100 only; must be drilled for EH2100P
Lock: Phillips head screw
General
Construction
Upper Section: 5052H32 aluminum
Lower Section: Vacuum-formed ABS plastic (UL listed material)
Viewing Window: Lucite
®
SAR (Super Abrasion Resistant acrylic)
Color
Upper Section: Alodine
Lower Section: Eggshell white ABS plastic
Environment: Indoor; 32° to 120°F (0° to 49°C)
Weight: 1.75 lb (.79 kg)
Ratings
NEMA 1
(Design and product specifications subject to change without notice.)