Pelco EH3014 Security Camera User Manual


  Open as PDF
of 4
 
DESCRIPTION
The EH3010, EH3014 and EH3110 are indoor, light-duty camera enclosures. The aluminum en-
closure has a removable rear cap with adjustable glands that make camera and cable installa-
tion simple. A removable front cap provides easy access for manual lens adjustment, without
removing the camera.
Models
EH3010 Mounts horizontally, total camera and lens length must not exceed 8 inches
(20.32 cm)
EH3014 Mounts horizontally, total camera and lens length must not exceed 12 inches
(30.48 cm)
EH3110 Same as EH3010 except mounts vertically
INSTALLATION
The following items are supplied:
2 1/4-20 x .50-inch bolts
2 1/4-inch flat washers
2 1/4-inch split lock washers
2 Camera mounting screw, 1/4-20 x .375-inch, Phillips, pan head (EH3010 and EH3014 only)
1 Camera mounting screw, 1/4-20 x .375-inch, Phillips, pan head (EH3110 only)
Camera and Lens
1. Ensure that the mounting surface is capable of supporting four times the weight of the en-
closure, camera and lens.
2. Remove the two Phillips head screws from the rear cap.
3. Remove the rear cap from the enclosure. Pull the sled assembly out and remove it from the
rail.
4. Place the camera and lens on the sled assembly.
5. Secure the camera and lens to the sled with the 1/4-20 Phillips screw provided. Extend the
lens to its maximum length before installing. This will ensure that the lens has enough
clearance and will not hit the window during focusing.
6. Thread video and power cables through the glands in the rear cap. Connect cables to the
camera. Tighten the glands around the cables. Refer to Tables A and B for wiring information.
7. Place the sled, with the camera, inside the enclosure.
8. Replace the end cap and secure with the Phillips head screws. Make sure the end cap is
firmly seated against the enclosure.
9. To focus camera, remove the front cap and adjust the lens. Refer to the manual supplied
with the lens.
C404M-D (8/00)
EH3010/EH3014/EH3110
Indoor Enclosures
®
3500 Pelco Way
Clovis, CA 93612-5699
USA
In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150
International Customers:
Tel +1(559) 292-1981
FAX +1(559) 348-1120
www.pelco.com
next