Filter
Top Products
IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1. Installation and servicing should only be done by qualified service personnel and conform
to all local codes.
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P enclosure,
it is designed for indoor use only and it must not be installed where exposed to rain and
moisture.
3. Only use replacement parts recommended by Pelco.
4. The installation method and materials should be capable to supporting four times the
weight of the enclosure, pan/tilt, camera and lens combination.
The product and/or manual may bear the following marks:
Please thoroughly familiarize yourself with the information in this manual prior to installation and
operation.
C413M-E (7/99)
EH4007/EH4010/EH4014/EH4018
Camera Enclosure
3500 Pelco Way,
Clovis, CA 93612-5699
USA
In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150
International Customers:
Tel (1-559) 292-1981
FAX (1-559) 348-1120
www.pelco.com
®
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within this unit.
This symbol indicates that there are impor-
tant operating and maintenance instructions
in the literature accompanying this unit.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
DESCRIPTION
The EH4007, EH4010, EH4014, and EH4018 are low-cost camera enclosures designed for use
with solid-state CCD-type cameras in indoor environments. These enclosures are easy to install
and service. The removable rear cap provides easy access to the slide-out camera sled on which
the camera is mounted and has adjustable glands that make installing the power and video cables
easy. The removable front cap lets you manually adjust the lens without removing the camera.
The EH4007 is primarily designed for vertical-format CCD-type cameras and includes a ceiling-
mount bracket. The EH4010 is designed for 1/2-inch format cameras and can be used in fixed-
mount applications or mounted to a light-duty pan/tilt. The EH4014 and EH4018 are designed for
2/3-inch format cameras with fixed focal length or motorized lenses.
Models
EH4007 7-inch camera enclosure
EH4010 10-inch camera enclosure
EH4014 14-inch camera enclosure
EH4018 18-inch camera enclosure
INSTALLATION
The following parts are supplied:
EH4007
1 7-inch camera enclosure
To attach camera to sled:
1 3/8-inch Phillips screw
EH4010/EH4014/EH4018
1 Camera enclosure
1 Parts bag
2 Glands
To attach camera to sled:
1 3/8-inch Phillips screw
To mount enclosure:
2 1/2-inch hex screws
2 Flat washers
2 Split lock washers