Filter
Top Products
2 C202M-C (1/08)
IMPORTANT SAFETY INSTRUCTIONS
1. Installation and servicing should only be done by qualified service and installation personnel.
2. Installation shall be done in accordance with all local and national electrical and mechanical codes
utilizing only approved materials.
3. Use only installation methods and materials capable of supporting four times the maximum
specified load.
4. Use stainless steel hardware to fasten the mount to outdoor surfaces.
5. To prevent damage from water leakage when installing a mount outdoors on a roof or wall, apply
sealant around the bolt holes between the mount and mounting surface.
The product and/or manual may bear the following marks:
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present within
this unit.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
DESCRIPTION
The EM1009U/EM1015U/EM1900U mounts are capable of supporting loads up to 40 lb (18 kg) and are
designed for ceiling, pedestal, and wall applications. These versatile mounts can be used with enclosures
that have a 2-inch (5.08 cm) mounting hole pattern.
Constructed of aluminum, all three mounts feature a manually adjustable swivel head that allows
360-degree horizontal positioning of the enclosure. In addition, there is a 1-inch (2.54 cm) diameter cable
feedthrough hole and openings in the top and bottom to conceal the wiring.
MODELS
EM1009U Universal, medium-duty, pedestal/ceiling mount with manually adjustable swivel head.
Mount extends 9.80 inches (24.89 cm) from wall or ceiling.
EM1015U Universal, medium-duty, pedestal/ceiling mount with manually adjustable swivel head.
Mount extends 15.80 inches (40.13 cm) from wall or ceiling.
EM1900U Universal, medium-duty, 90-degree wall mount with manually adjustable swivel head.
Mount extends 15.03 inches (38.18 cm) from wall or ceiling.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.