Filter
Top Products
PELCO • 300 W. Pontiac Way, Clovis, CA 93612-5699 • (559) 292-1981 • (800) 289-9100
FAX (800) 289-9150 or (559) 292-3827 • DataFAX (800) 289-9108 or (559) 292-0435
IH8 Series
Camera Enclosure
Installation/Operation
Manual C439M - 10/92
®
1.0 SCOPE
The information contained within this manual covers
the IH8 Series camera enclosure with integral mount.
1.1 WARNING
To insure safe operation, observe the following guide-
lines:
1 Installation shall be done by qualified service
and installation personnel.
2. Installation shall be done in accordance with
all local and national electrical and mechani-
cal codes utilizing only approved materials.
3. Use only installation methods and materials
capable of supporting four (4) times the maxi-
mum specified load.
4. Unless the unit is specifically marked as a
NEMA Type 3-6P enclosure, it is designed
for Indoor use only and it must not be installed
where exposed to rain and moisture.
5. Only use replacement parts recommended by
Pelco.
Please thoroughly familiarize yourself with the infor-
mation in this manual prior to installation and opera-
tion.
2.0 DESCRIPTION
The IH8 Series is a light duty camera enclosure with
integral mount designed for indoor use. The IH8 Series
can be used with 1/3-inch and 1/2-inch cameras and
will accommodate fixed focal length lenses with or
without auto-iris operation up to 5 inches in length.
This enclosure has a clamshell cover for easy access
when installing or servicing the camera/lens.
Also included in the unique design of this enclosure is
a cable feedthrough hole, a slotted camera bracket, and
an integral mount. The IH8 Series enclosure is con-
structed of .074 ABS plastic and the integral mount is
aluminum.