Filter
Top Products
C3426 / REVISED 5-07
International Standards
Organization Registered Firm;
ISO 9001 Quality System
PRODUCT SPECIFICATION
camera site
Camclosure
®
IS Series Rugged Mini Dome
IS110 SERIES SURFACE MOUNT, WDR, DAY/NIGHT, HIGH RES
Product Features
• Fully-Integrated Enclosure with Camera and Lens
• Rugged, High-Impact, Vandal-Resistant, Puncture-Proof Domes;
Tamper-Resistant Hardware
• 4 Camera Options:
– Day/Night Wide Dynamic Range (WDR): Pixel-Based Imager for
Accurate Color Representation, Progressive Scan
– Day/Night High Resolution: 540 TVL
– Wide Dynamic Range (WDR): Pixel-Based Imager for Accurate
Color Representation, Progressive Scan
– High Resolution Color: 540 TVL
• Varifocal Lens Options: 3 mm to 9.5 mm, 9 mm to 22 mm
• Fixed Lens Options: 3 mm, 3.6 mm, 6 mm, 8 mm, 12 mm
• Includes Both Composite and Unshielded Twisted Pair (UTP) Outputs
• 12 VDC or 24 VAC Operation, Autosensing
• Available with Smoked or Clear Bubble
• Service Connector for Video Output
Camera Modules
The
IS110 Series Camclosure
®
Integrated Camera System
offers a large selection of camera and lens options. Available
camera modules include the following:
•
Day/night wide dynamic range (WDR)
and
wide dynamic
range
—Pelco’s WDR uses a pixel-based imager that adjusts for
lighting by pixel. Traditional CCD cameras adjust the entire image
for lighting conditions that appear in a small portion of the image
or that are not extreme. Different lighting problems occur at night.
Car headlights and parking lot lights are good examples of
problematic video images. Use Pelco’s Day/Night WDR where you
need the camera to adjust from extreme lighting to low light
conditions.
•
Day/night high resolution (540 TVL)
color camera with auto
iris, varifocal lens—Application examples include environments
that require monochrome images at night and color images
during the day.
•
High resolution (540 TVL)
color camera with auto iris, varifocal
lens or fixed iris lens—Application examples include all general-
purpose environments.
Enclosure Modules
The
IS110 Series Camclosure Integrated Camera System
combines an environmental cover, back box, camera, lens, and lower
dome into a small, high-security system that is quick and easy to
install. The system is perfect
for a variety of indoor and outdoor
applications and its versatile design allows for multiple mounting
options
.
The
IS110 Series
can be installed directly into a ceiling or wall, or to
a 1.5-inch (3.81 mm) NPT fitting with the optional pendant mount
adapter (ICS110-PG). The unit can also mount directly to a
4S electrical box using the optional adapter plate (ICS110-AP) or a
standard plaster ring.
The system’s back box has three conduit openings: two in the base,
and a threaded 0.75-inch (1.91 cm) opening in the side. The environ-
mental cover can be used to hide and protect the side conduit
opening if it is not used.
U.S. Patents
D476,025; 6,715,939 B2; 6,805,498 B2
IP66
IS110 SERIES DOME
IS110 SERIES DOME WITH
ICS110-PG PENDANT ADAPTER
AND SWM-GY MOUNT