Filter
Top Products
Pelco Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada
Tel: (800) 289-9100 • FAX (800) 289-9150
International
Tel: (559) 292-1981 • FAX (559) 348-1120
www.pelco.com
SYSTEM MODELS AND ACCESSORIES
MODEL NUMBERS
Dome Only
IS110-ENC IS110 Series surface mount enclosure (no camera/lens)
IS110-LD IS110 Series smoked bubble
IS111-LD IS110 Series clear bubble with liner
When ordering an IS110 Series surface mount dome with no camera or lens, please order 1 enclosure and 1 bubble.
System Numbers
Use this table to create a model number to specify your IS110 Series Camclosure. Note the additional information below the table for fixed lens and NTSC/PAL options.
For example, IS111-DNV9X is the model number for a PAL version color day/night high resolution camera with a clear bubble and a 3 mm to 9.5 mm varifocal lens.
For information, contact your Pelco sales representative.
RECOMMENDED POWER SUPPLIES
TF2000 Power supply for one 24 VAC camera, 20 VA
MCS Series Multiple 24 VAC camera power supply, indoor
MCS*E Series Multiple 24 VAC camera power supply, indoor
WCS Series Single/multiple 24 VAC camera power supply,
outdoor
OPTIONAL ACCESSORIES
ICS110-AP Adapter plate for a 4-square electrical box
ICS110-PG Pendant mount adapter
ICS110-BV Breather vent to prevent condensation from
forming inside the unit
SWM Series Compact wall mount with cable feedthrough.
Requires ICS110-PG adapter.
ICS-SC 4-foot service/monitor cable; compatible with
any standard monitor BNC connector
IS11 a–b c d
Bubble
Camera
Lens
PAL
Bubble (a) Camera (b) Lens (c) PAL (d)
0 Smoked
1 Clear with black liner
DW Color Day/Night
Wide Dynamic Range
DN Color Day/Night
High Resolution
CW Color Wide Dynamic Range
CH Color High Resolution
Available with all cameras:
V9 Varifocal, 3 mm to 9.5 mm, Auto Iris
V22 Varifocal, 9 mm to 22 mm, Auto Iris
Available with CH cameras:
3 Fixed, 3 mm
3.6 Fixed, 3.6 mm
6 Fixed, 6 mm
8 Fixed, 8 mm
12 Fixed, 12 mm
DN and CH cameras only:
XPAL
Do not use for NTSC.
Pelco, the Pelco logo, and Camclosure are registered trademarks of Pelco.
Specifications subject to change without notice.
©Copyright 2007, Pelco. All rights reserved.